Lightweight 9 Door Yellow ABS Plastic Employee Locker – 47″ W x 38″ H Small Compartment Storage for Factory & Office | Custom Logo
Badges: ✓ In Stock | ✓ Custom Logo Available | ✓ Factory Direct
Key Specifications
| Item | Details |
|---|---|
| Overall Dimensions | 1196mm × 960mm × 420mm / 47″ × 38″ × 16.5″ |
| Total Compartments | 9 (3 columns × 3 rows) |
| Single Compartment | 372mm (W) × 320mm (D) × 420mm (H) |
| Material | High-impact ABS plastic |
| Base Height | 80mm integrated plinth |
| Color | Yellow (8 colors available) |
| Lock Options | Key / Combination / RFID / Padlock Hasp |
Lightweight 9 Door Yellow ABS Plastic Employee Locker Product Overview
According to a 2024 facility management industry survey, rust-related locker replacements cost industrial sites an average of $3,200 per unit. Metal lockers rust. They dent. They are heavy enough that moving one requires scheduling a forklift. If you have been dealing with any of that, this 9-door ABS plastic locker might be the upgrade your facility actually needs.
It measures 1196mm wide by 960mm tall and holds nine individual compartments in a 3-column, 3-row layout. Each compartment gives you 372mm of width, 320mm of depth, and 420mm of height. That is enough for a backpack, work boots, a hard hat, or whatever your people need to lock away during the day.
The yellow color is not painted on. It runs through the plastic itself, so it does not chip or fade the way powder coating does. After a year in a humid pool area or a dusty factory floor, it still looks like you just installed it.
Why More Facilities Are Switching to ABS Plastic Lockers
For decades, metal was the only real option for institutional storage. That is changing. Here is what facility managers who made the switch actually report.
No rust, no matter the environment
Metal lockers in swimming pools, coastal facilities, or any space with poor ventilation start showing orange spots within a year or two. ABS plastic does not corrode. Chlorine, salt air, grease, and industrial chemicals do not faze it. You clean it with a hose. It comes out looking the same.
Lightweight construction that still holds up
This unit weighs a fraction of what a comparable steel locker weighs. Two people can carry it into position without calling facilities for equipment. The material is not brittle plastic — it absorbs impact and springs back. Drop something against it. Bump it with a cart. It does not dent.
Formaldehyde-free from the start
Some budget storage products use particle board or composite materials that off-gas. Our ABS lockers are manufactured without formaldehyde. They meet standards for indoor air quality in schools and healthcare facilities.
Modular and flexible
You are not stuck with a fixed 3×3 layout. The design allows side-by-side connection of multiple units to build longer runs. With proper wall anchoring, stacking is also possible. If your space changes later, the lockers can be reconfigured.
Every Detail That Affects Daily Use
We did not add features for the catalog. Each one solves a real complaint we heard from customers.
- Recessed number plates — Sit inside a protected pocket. No scratching, no fading. Numbers stay readable for years without maintenance.
- Built-in key hook in every compartment — Metal hook inside every door. Staff hang keys, ID badges, lanyards. Small thing. Used every day.
- Rounded edges throughout — No sharp corners catching clothing or causing bruises in busy hallways. It matters more than you think.
- Spring-loaded door catches — Doors stay shut through vibration, foot traffic, and accidental contact. No more finding lockers ajar at shift end.
- 80mm elevated base — Integrated plinth lifts the bottom row off the floor. Mopped floors and minor flooding — the gap handles it.
- Top storage compartment — Small open shelf on top of each column. Lost-and-found bins, cleaning supplies, shared equipment. Use it.
Where This Locker Works Best
The 9-door configuration hits a sweet spot for medium-sized teams. Nine individual lockers in a single unit takes up less wall space than nine separate pieces.
Factory Floors & Warehouses
Dust, grease, temperature swings — ABS handles all of it. Workers store PPE, lunch bags, and street clothes securely. Compact width fits along assembly line walls.
Office & Coworking Spaces
Fits corners, under stairs, or in converted storage closets. The bright yellow looks intentional, not like an afterthought.
Gyms & Fitness Centers
Wet shoes do not rust the bottom. Individual compartments are sized for personal items. Wet clothes dry faster inside.
Schools & Universities
Survives student abuse. Formaldehyde-free meets indoor air quality standards. Multiple colors coordinate with school branding.
Swimming Pools & Aquatic Centers
Chlorine-resistant. Ventilation-friendly design lets wet items dry between uses. Maintenance staff clean it with the same chemicals as surrounding tile.
Industrial Storage Lockers
Replaces rusty metal units in any humid or chemical-exposed environment. Long service life with near-zero maintenance cost.
Frequently Asked Questions
How much does a 9-door ABS plastic locker weigh?
(This is one of the top questions we get from factory and gym procurement managers.) Exact weight varies by configuration, but this unit is significantly lighter than a comparable steel locker. Two adults can move and position it without mechanical equipment. Request our spec sheet for exact shipping weight before placing large orders.
Can ABS plastic lockers be used outdoors?
ABS handles outdoor use better than most plastics but is not rated for prolonged UV exposure. For covered outdoor areas with indirect light, it performs well. For fully exposed outdoor installations, discuss your conditions with us before ordering.
What is the difference between ABS and metal lockers?
Metal is heavier and can take heavier loads when properly anchored. ABS is lighter, rust-proof, and impact-resistant. ABS does not need touch-up paint, does not dent, and resists most chemicals. In humid or chemical-exposed environments, ABS typically costs less over its lifetime due to reduced maintenance.
How do I install an ABS plastic locker?
Clip-and-lock assembly system — no special tools required. Panels slide together and lock into place. Side-by-side connection hardware is included. Wall anchoring is recommended in high-traffic areas or where stacking is involved. Full instructions ship with each unit.
What lock options are available?
Four standard types: mechanical key lock, combination lock, electronic RFID lock, and padlock hasp. You can mix lock types within the same order — key locks for staff, padlock hasps for members. Electronic locks require separate power planning for your installation. Tell us your scenario and we will help plan the right mix.
What is the minimum order for custom colors or logos?
Standard colors (yellow, white, blue, pink, gray, green, orange, brown) have no minimum. Custom Pantone colors: min 10 units, 2-3 extra weeks. Logo printing: min 20 units, 3-4 extra weeks.
Technical Specifications
| Item | Details |
|---|---|
| Overall Dimensions | 1196mm (W) × 960mm (H) × 420mm (D) / 47″ × 38″ × 16.5″ |
| Single Compartment Interior | 372mm (W) × 320mm (D) × 420mm (H) |
| Total Compartments | 9 (3 columns × 3 rows) |
| Material | High-impact ABS plastic |
| Base Height | 80mm integrated plinth |
| Standard Colors | Yellow, White, Blue, Pink, Gray, Green, Orange, Brown |
| Custom Colors | Pantone matching available (min. 10 units) |
| Lock Options | Key lock / Combination lock / Electronic RFID / Padlock hasp |
| Logo Customization | Screen printing or adhesive label (min. 20 units) |
| Assembly | Tool-free clip-and-lock modular system |
| Shipping | 5-7 business days for in-stock configurations |
Custom Logo, Colors, and Lock Configurations
Standard lockers work for standard situations. Most customers end up customizing something.
Logo printing
Add your company logo, school mascot, or facility branding to the locker doors or frame. Screen printing produces the most durable result for high-traffic areas. Adhesive labels work well for smaller runs or testing a design before committing. Min. 20 units, 3-4 week lead time.
Color matching
Eight standard colors cover most needs. Need a specific brand color for a corporate installation? We can match to Pantone codes. Min. 10 units, 2-3 extra weeks.
Lock flexibility by use case
Mix lock types within the same installation. A gym can use padlock hasps for members (bring your own lock) and key locks for staff. Electronic RFID locks suit high-tech facilities that need access tracking.
What Makes Henna Office Furniture Different
We run a manufacturing facility in Luoyang, China. Fourteen years of making steel and plastic furniture for global markets taught us something simple: quality control cannot be outsourced and still stay in control.
Our ABS locker line came out of listening to facility managers who were tired of replacing rusted metal units every few years. We did not invent ABS plastic. We figured out how to build modular industrial storage lockers that perform reliably in real environments — swimming pools in Southeast Asia, outdoor training facilities in the Middle East, school locker rooms in Northern Europe.
Honestly, we stumbled at first. Our first ABS locker shipment to a pool facility in Thailand in 2019 arrived with noticeable color deviation from the sample. We replaced the entire batch at our cost before the client ever opened a box. That incident is why we now do photo confirmation on every unit before it ships.
Every unit is inspected before it ships. If something is wrong when it arrives, we fix it. We have built a supply chain that lets us fulfill orders from a single unit up to container loads for large-scale installations.
Ready to Get a Quote?
Stock configurations ship within 5-7 business days. Custom colors, logo printing, and electronic locks extend lead times — typically 3-6 weeks depending on specifications.
Send us your requirements: Tell us your quantity, destination country, preferred lock type, and whether you need custom colors or branding. We will send pricing and a realistic delivery estimate within one business day.
